Last Modified: 11-29-2007 1.6 A
Service Category: Steering Section: Steering Column
Model Year: 2008 Model: Sequoia Doc ID: RM0000030KS002X
Title: STEERING COLUMN: MULTIPLEX TILT AND TELESCOPIC ECU (for Power Tilt and Power Telescopic Steering Column): INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU



(a) Install the ECU with the 2 screws.

Torque: 2.0 N·m (20 kgf·cm, 18 in·lbf)

(b) Connect the 2 ECU connectors.

2. INSTALL NO. 3 AIR DUCT SUB-ASSEMBLY STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column): REMOVAL (2008 Sequoia)+

3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

5. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: INSTALLATION (2008 Sequoia)+

6. INSTALL LOWER STEERING COLUMN COVER



(a) Attach the 2 claws to install the steering column lower cover.

7. INSTALL UPPER STEERING COLUMN COVER



(a) Attach the claw to install the upper steering column cover.

(b) Attach the 4 clips to install the upper steering cover onto the instrument panel cluster finish panel.

(c) Install the 2 screws.

HINT:

Turn the steering wheel to the right and left as necessary to install the 2 screws.

8. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: DIAGNOSIS SYSTEM (2008 Sequoia) .

9. CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Torque: 5.4 N·m (55 kgf·cm, 48 in·lbf)

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 Sequoia) .